DDraceNetwork - questions

Please tell me if I'm writing this in the wrong channel. Hello I'm not certain of where to send this message but I need help with port forwarding. I learned quite a bit about it and I got help from people who port forwarded before but I have an issue that I cannot fix.

2024-08-23 22:15:19 E register/6/ipv4: ERROR: the master server reports that clients can not connect to this server.
2024-08-23 22:15:19 E register/7/ipv4: ERROR: the master server reports that clients can not connect to this server.
2024-08-23 22:15:19 E register/6/ipv4: ERROR: configure your firewall/nat to let through udp on port 8303.
2024-08-23 22:15:19 E register/7/ipv4: ERROR: configure your firewall/nat to let through udp on port 8303.

This is the error that I encounter when I use DDNet-Server.exe. I tried port forwarding with ports that were already opened on my pc and ports from 8303 to 8310. I also tried to give permissions to the client by configuring my firewall (create an exeption). I'm really not an expert in that type of things, I just watched tutorials and I read documentations on internet to try to fix the issue. I would like to host a server to test my maps with my friends. Thanks for reading/helping. (edited)

Hello is it possible to set "cl_message_client_color" to a custom color like "cl_message_client_color 1769216" ? It doesnt seem to work for me

Michel

Hello is it possible to set "cl_message_client_color" to a custom color like "cl_message_client_color 1769216" ? It doesnt seem to work for me

8 symbols?

むぎ

8 symbols?

doesnt seem to matter, its always black

That color is black. It's in HSL format and has lighting zero. The default color is 9633727. Use $RRGGBB to specify a color in RGB hex format (edited)

Robyt3

That color is black. It's in HSL format and has lighting zero. The default color is 9633727. Use $RRGGBB to specify a color in RGB hex format (edited)

thx

chat help

im getting this error when trying to open the map, any reasons why? help would be appreciated. this map took ages to make

Speedy Squirrel

im getting this error when trying to open the map, any reasons why? help would be appreciated. this map took ages to make

Exit the editor and check the local console (F1) for more detailed error messages

Robyt3

Exit the editor and check the local console (F1) for more detailed error messages

17:33

i dont understand

17:33

last three

Speedy Squirrel

Click to see attachment 🖼️

Seems like it's corrupted. Now idea how this happens, maybe check your hard drive for errors

Robyt3

Seems like it's corrupted. Now idea how this happens, maybe check your hard drive for errors

my hard drive is fine, map is worth 2896 KB, btw this was such an old map i did, i found it in this format just to give u more context:

17:38

idk why it was called like that

Speedy Squirrel

Click to see attachment 🖼️

Could be anything, how do you know it's a teeworlds map file?

Robyt3

Could be anything, how do you know it's a teeworlds map file?

type is "DDnet Map File"

17:41

i never changed the format

You can name files however you like

17:41

Changing the file extension doesn't change the contents

17:42

I assume this is not a DDNet map or did you remember saving a DDNet map with that filename at the location at that time?

Robyt3

I assume this is not a DDNet map or did you remember saving a DDNet map with that filename at the location at that time?

nope

17:42

the map name was for some reason the folder name

17:42

and there was 3 maps inside

17:43

"bruh" is the map name

hm, no idea, maybe some third party backup tool

steam

17:44

contained in steam

17:45

idk what steam did to it

17:46

thanks for the help tho

Canarda

Please tell me if I'm writing this in the wrong channel. Hello I'm not certain of where to send this message but I need help with port forwarding. I learned quite a bit about it and I got help from people who port forwarded before but I have an issue that I cannot fix.

2024-08-23 22:15:19 E register/6/ipv4: ERROR: the master server reports that clients can not connect to this server.
2024-08-23 22:15:19 E register/7/ipv4: ERROR: the master server reports that clients can not connect to this server.
2024-08-23 22:15:19 E register/6/ipv4: ERROR: configure your firewall/nat to let through udp on port 8303.
2024-08-23 22:15:19 E register/7/ipv4: ERROR: configure your firewall/nat to let through udp on port 8303.

This is the error that I encounter when I use DDNet-Server.exe. I tried port forwarding with ports that were already opened on my pc and ports from 8303 to 8310. I also tried to give permissions to the client by configuring my firewall (create an exeption). I'm really not an expert in that type of things, I just watched tutorials and I read documentations on internet to try to fix the issue. I would like to host a server to test my maps with my friends. Thanks for reading/helping. (edited)

I'd suggest looking into your router settings to see what ports are configured for port forwarding

Sans

I'd suggest looking into your router settings to see what ports are configured for port forwarding

I did check all of my ports but I don't know how to check the one who are configured for that

Would you mind sending a screenshot of the port forwarding configuration on your router?

Sans

Would you mind sending a screenshot of the port forwarding configuration on your router?

I took this screenshot earlier but I changed the internal and external port to 8303

try changing the protocol to strictly UDP

what did you put in device ip address?

18:30

and where did you get the ip from

im guessing that's his local ip, otherwise it wouldnt work

18:31

something like 192.168.X.X

Sans

something like 192.168.X.X

yes

18:32

my ipv4

it starts with 192.168?

your local ip, yes? (edited)

18:32

not public ip

Arijan

it starts with 192.168?

yes

Sans

try changing the protocol to strictly UDP

changed

does it work now?

lemme try

18:35

no it doesn't

try restarting the server first if it was already running when you made the change

it wasn't

that's weird

18:36

same error?

yes

18:36

do I keep this line like that? sv_register ipv4

is your public ip visible to the internet?

I believe

18:37

idk

open a command prompt and type this curl ifconfig.me, it should return your public ip address, in which case it means it is

Sans

open a command prompt and type this curl ifconfig.me, it should return your public ip address, in which case it means it is

ok I got another ip

that's definitely weird

18:39

can your friends not use that ip + the port to connect at all?

uh idk

Sans

that's definitely weird

it's a public ip now I think

18:41

it starts with 74

@Canarda Wait are you doing sv_register ipv4 literally?

18:41

it should be a boolean, 1 or 0

18:41

like sv_register 1

cakexsniffer told me to do that

Sans

like sv_register 1

Try this instead

ok I try

18:42

still same error

Well then I'm not sure what's wrong, sorry but you'll have to keep looking

18:43

I'm out of ideas :(

Sans

Well then I'm not sure what's wrong, sorry but you'll have to keep looking

I looked everywhere

18:45

thanks for help

maybe you just can't forward ports

18:54

if you go into your router settings and look for WAN you should see an ip address

18:54

take that ip address, put it into chatgpt and ask him if it's public or private

Arijan

if you go into your router settings and look for WAN you should see an ip address

where is WAN

idk its different for every router but it should be called wan

Arijan

idk its different for every router but it should be called wan

not LAN?

not lan

Arijan

not lan

I cannot find it

19:42

I see this

19:43

nvm

19:43

I found it

19:44

@Arijan I believe it's private

then you cant

sad

unless you use something like ngrok or a vpn that lets you port forward

Arijan

unless you use something like ngrok or a vpn that lets you port forward

what is ngrok

app that lets you port forward from somebody else's server

ok but I need the person permission I suppose

no thats what ngrok does

19:47

they give you a server

isn't that illegal

why

taking someone's server

19:48

without their permission

19:48

idk I just ask

no they give you their own server

19:49

temporary

is it hard or simple to use

probably easy

19:49

https://ngrok.com/docs/using-ngrok-with/minecraft/ you can look at this example

oh alr wil ltry

19:51

@Arijan my computer detected a virus

19:51

I won't take any risk

19:52

just curious which antivirus

Arijan

just curious which antivirus

you gonna check? (edited)

check what? im just curious

check if it's a virus

19:52

oh

19:52

nvm

19:52

I misread

how did you even download it so fast

Arijan

just curious which antivirus

windows and opera gx both said it's a virus

19:53

idk

dont download it then

yeah I won't

this is not related to ddnet anymore but this video shows it i think https://youtu.be/SZmc5uoNCko (edited)

Arijan

this is not related to ddnet anymore but this video shows it i think https://youtu.be/SZmc5uoNCko (edited)

gonna watch this later, thanks

Canarda

windows and opera gx both said it's a virus

20:31

bru is using spyware that works like "antivirus" for him

кто то знает как kill_protection поставить на 5 минут для себя?

particle [Shiza]

кто то знает как kill_protection поставить на 5 минут для себя?

english only

21:31

for russian go #off-topic

Does anyone know how to set kill_protection for 5 minutes for themselves?

particle [Shiza]

Does anyone know how to set kill_protection for 5 minutes for themselves?

u could make a config to ban kill/disconnect binds

21:35

im not sure if u can change kill protection starting time (edited)

21:36

this is what i use

antikill.txt

415 bytes

むぎ

im not sure if u can change kill protection starting time (edited)

(

particle [Shiza]

(

i will use it "bind alt+r kill"

21:40

ty

When I open the game from Steam, the moment the game opens, it crashes after 2 seconds. what should i do

try opengl maybe?

21:49

when you launch the game

what is the grid for entities